AFV-P Series High Performance Programmable AC Power Supply
10
2.2.1 Notice for installation
1. The device must be installed on horizontal grounds, and should be located near
the load so that the connection is as short as possible.
2. Leave sufficient space around the device for ventilation and maintenance (refer
to Figure 2.1). Do not block the cooling fan opening in case of internal tempera-
ture getting too high and having bad impact on product life.
3. The device should be located in proper ventilation, the ambient temperature
and humidity should not be high. Stay away from liquid, flammable gases, cor-
rosive substance, heat sources or direct sunlight. Keep the opening free from
dust.
4. The operating environment should be free from dust, volatile organic com-
pounds, high salinity or corrosive substance.
5. Do not operate the device outdoor.
6. Use correct cable selection and a proper power distribution to ensure the safety
of the device and the users.
Figure 2.1 The required space for the device.
To Next Page
Loading...
