4) Currently the password setting can not be changed by customers.
5) If select “Auto Diagnostic”, you will see the following interface. This mode is to be used for
production and professional servicing purpose.
6) If select “PCS Counted and Reset” you will see the following interface. This interface is to
tell the total quantity of counted bills in this counter since last clearing to zero. We provide a
hidden setting for distributors to clear this number for after-sales service.
7) If select “Acquire CIS Image”, you will see the following interface. This mode is for servicing
purpose.
8) If select “Detection Level”, you will see the following interface. You can use left and right
To Next Page
Loading...
Need help?
General