To Next PageTo Next Page
Need help?Do you have a question about the Premier Mounts UNI-SPKR and is the answer not in the manual?
Identifies the specific on-wall speaker models (UNI-SPKR/UNI-SPKRB) being installed.
Lists necessary tools required for the installation process, not included with the product.
Details all included hardware and speaker components to verify before installation.
Introduction to the on-wall speaker installation, outlining compatibility and provided parts.
Details the initial steps for connecting speaker wires, including polarity and potential shorts.
Instructions for removing pre-installed wires and connecting new 18 AWG speaker wires.
Guides on connecting speaker wires to the power amplifier using a 4-pin plug and ensuring correct polarity.
Steps for mounting the CPA-50 power amplifier within the GearBox mount using provided hardware.
Instructions for attaching the speakers to the GearBox mount, including removing doors and using anchors.
Details securing speakers to the mount using drywall anchors and specific screws.
General| Type | Speaker Mount |
|---|---|
| Tilt | Yes |
| Swivel | Yes |
| Compatibility | Universal |
| Material | Steel |
| Mount Type | Wall |
| Tilt Range | 15 degrees |
| Weight Capacity | 8 lb (3.6 kg) |
| Load Capacity | 8 lb (3.6 kg) |
| Finish | Black |
| Installation | Wall Mounted |
