Prestige APS-122E User Manual

128-9345
Page 1 of 8
Page 1
PATENTED: www.voxxintl.com/company/patents
Model APS-122E
3 Button Remote Security
System Owner's Manual
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry
Canada.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference
that may cause undesired operation.
Warning!
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modications to this equipment. Such modications could void
the user’s authority to operate the equipment.
Table Of Contents:
Introduction Features and Options Page 2
Arming The System Page 3 - 4
Protection While The System Is Armed Page 4
Disarming The System Page 4 - 5
Intrusion Signals and Tones Page 5
Valet Override, Programming & Safety Control Switch Page 5 - 6
Manually Overriding Your System Page 5 - 6
Eliminating The Arm/Disarm Chirps Page 6
Remote Panic Operation Page 6
Trunk Release / Optional Device Channels Page 6
Replacement Or Additional Transmitters Programming Page 7
Features And Function Settings Page 8
System Functions At A Glance Page 8

Prestige APS-122E Specifications

General

Model	APS-122E
Battery Backup	12V 7Ah
Siren Output	12VDC
Number of Zones	8
Communication	PSTN

Summary

Arming The System

Active Arming

Procedure for arming the system via transmitter lock button, with single chirp.

Passive Arming

System automatically arms after a delay once doors are closed, indicated by LED.

Protection While System is Armed

Disarming The System

Disarming Procedure

Disarming the system using the unlock button on the transmitter.

Intrusion Warning Signals

LED Indicators

Interpreting LED flashes to identify intrusion attempts to specific zones.

Valet Mode

Entering and Exiting Valet Mode

Procedure to temporarily bypass alarm functions using the valet switch.

System Override

Using the valet switch to start the vehicle if the transmitter fails.

Eliminating Arm / Disarm Chirps

Remote Panic Operation

Trunk Release and Optional Accessories

Optional Accessories

Information on using the system for trunk release or other optional devices.

Programming Transmitters

New or Replacement Transmitters

Step-by-step guide for programming new or replacement transmitters.

System Functions at a Glance

Dash LED Indicators

Summary of dash LED indicator meanings for system status.

Siren Chirp Indicators

Summary of siren chirp indications for system status.

Parking Lamp Indicators

Summary of parking lamp flash indications for system status.