LIGHTING THE BURNERS
1. To light the hotplate push in the appropriate control knob and turn anti-clockwise to the
l a r ge flame symbol (fig. 9).
2. Keep the knob depressed until the burner lights.
3. Turn the tap to the re q u i r ed sett i n g .
4. Return control knob to the OFF position fo l lowing use.
NOTE: matches can be used to light the burners in the event of a power fa i l u r e .
Use an appropriately sized pan and with flat bottom for each burner (see the table below
and fig. 10).
When the contents of the pan start to boil, turn the knob down to reduced rate posit i o n .
A l w ays put a lid on the pan.
Using Your Hob
9
FIG. 10
FIG. 9
Burners
Rapid
(large)
2.5kW
Semi-rapid
(medium)
1.8kW
Auxiliary
(small)
1.1kW
Ø pans in cm 20 - 22 16 - 18 10 - 14
Zepa GH60.qxd 19/9/07 8:55 Page 11
To Next Page
Loading...