18
IMPORTANT
• Appliance installation and maintenance
must only be carried out by QUALIFIED
TECHNICIANS and in compliance with
the local safety standards.
Failure to observe this rule will invalidate
the warranty.
• Always unplug the appliance before car-
rying out any maintenance operations or
repairs.
• The walls surrounding the oven must
be made of heat-resistant material.
• Taking care NOT to lift the oven by
the door handle.
Fig. 5.6
Before any maintenance is started
involving electrical parts of the appli-
ance, it must be disconnected from the
power supply.
• Let the oven cavity and the heating ele-
ments cool down;
• Switch off the electrical supply;
• Unscrew the protective cover (fig. 5.6);
• Unscrew and replace the bulb with a
new one suitable for high temperatures
(300°C) having the following specifica-
tions: 230-240V 50 Hz, 15W, E14;
• Refit the protective cover.
REPLACING THE OVEN
LIGHTS
(TOP and BOTTOM OVEN)
NOTE: Oven bulb replacement is not
covered by your guarantee.
ADVICE
FOR THE
INSTALLER
To Next Page
Loading...