Prestigio multipad pmp5080b - Getting Started; Charging the Device; Powering On and Off; Inserting a Memory Card

EN – 2 PMP5080
USER MANUAL
Prestigio MultiPad
PMP5080
EN
Home
Touch the home button to return to the
home screen. Touch and hold the home
button to display recently opened items.
Search
Go to search dialog directly
Camera
Take photos
Reset
Reset the device if it fails to operate
correctly.
Micro SD Card
Slot
Insert Micro SD card.
DC Port
AC adapter connection.
Mini-HDMI video
output
HDMI cable connection.
Built-in Microphone
Record sounds.
USB port
USB connection.
Earphone Jack
Earphones connection.
Getting Started
3. Charging
 Insert the AC connector to the DC port on the device and connect the
power adapter to the wall socket for charging.
 Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
4. Power on/Power off
 Press and hold the Power Button to turn on the device. It will
automatically enter the Home screen after the several start-up steps.
 Press the Power Button once to enter sleep mode and press it again
to awake the device.
 Press and hold the Power Button, and then tap on Power
off/Standby to power off the device.
5．Inserting a Memory Card
 The device supports micro SD/SDHC cards.
 To insert a Micro SD card, place the card connector towards the front
14
13
12
11
10
9
8
7
6
5