•Detector setup: Turn on to detect if there is road camera ahead.
•Firmware Version: Display the current system version.
LDWS (Lane Departure Warning System)
A lane departure warning system is a mechanism designed to warn a driver when the vehicle
begins to move out of its lane on freeways and arterial roads.
Note: System accuracy depends on lighting conditions and driving speed (optimum accuracy at
speeds of approx. 60 km/h and higher.)
Turn on LDWS DETECT and LDWS CALIBRATION, and finish LDWS calibration as follows:
1. Press [M] to return to preview mode.
2. Use [ ]/[ ] to adjust the position of the red line or the purple line.
3. Press [ ] to switch between the two lines.
4. Make sure that both lines are parallel to the car hood and 90° to the line marking on the road
surface.
5. Press [ ] to confirm.
To Next Page
Loading...
