EasyManua.ls Logo

prevention WS-820 - Care and Maintenance

prevention WS-820
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ERROR DISPLAYS AND TROUBLESHOOTING
CARE AND MAINTENANCE
Because the unit includes precision parts, care should be taken to avoid extreme temperature variations,
humidity, shock, dust, and direct sunlight. Do not drop or strike the unit. Make sure not to expose the unit to
moisture. This unit is not water resistant.
Clean the body with a cloth moistened with water and a mild detergent, and then wipe dry. Do not use gasoline,
paint thinner, or other strong solvents. Since the cuff may absorb perspiration and other fluids, inspect it for stain
and discoloration after each use. When cleaning the cuff, use a synthetic detergent and gently rub the surface.
When storing the unit, do not place heavy objects on it. When the unit has been stored at a temperature below
the freezing point, keep it for at least 1 hour in a warm place before using it.
Remove the batteries if the instrument is to be stored for an extended period of time. Keep the batteries
out of reach of children.
We
suggest that you have your monitor checked ever
y two years
. This operation may only be performed by the
manufacturer or by firms authorized by the manufacturer.
Do not inflate the cuff (start a measurement) when it is not wrapped around your wrist.
Do not tr
y to
stretch or twist the cuff, and do not bring it into contact with sharp or pointed objects.
Do not disassemble or modify the unit.
If you cannot get correct measurement with the methods above, stop using the unit and contact your dealer. Do
not tamper with the internal mechanism. If the unit malfunctions, please return it to the dealer or an authorized
service representative for service according to the warranty. Service data are provided to dealers by the manufacturer.
Measure with the correct posture.
Wrap the wrist cuff correctly.
Relax and then measure.
Keep quiet while taking the
measurement.
Take deep breaths to relax
before measuring.
Are you holding the wrist cuff at
heart level?
Is the cuff wrapped snugly around
the wrist?
Are your arms and shoulders
tense?
Have you been talking or moving
your hands during measurement?
Blood pressure readings constantly
vary with time of measurement and
nervous condition.
Cannot measure or readings
are too low (or high).
Blood pressure is different
each time. The reading is
extremely low (or high).
CAUSE / CHECK POINT
ERROR SYMOL / SYMPTOM
REMEDY
-11-