Pride Mobility Olympian Autolift - Page 10

Olympian Autolift www.pridemobility.com 10
I V . O P E R A T I O N
7. Release button when the boom is at its outmost position.
8. Position the scooter under the hoist so the lifting bracket is vertically below the spreader bar
9. Fold the scooter
10. Press and hold the down button to lower the boom
11. Engage the keyhole plates securely to the lifting bracket. (This bracket will vary depending on
what is being lifted)
12. Press and hold up button to raise the scooter/chair up to the upmost position then release button
steady the scooter during operation and ensure it does no contact the vehicle.
