Olympian Autolift www.pridemobility.com 11
WARNING! Never leave the system with power on when not in use.
13. Press and hold the left or right button (depending on side of installation) to move the hoist inwards -
steady the scooter/chair during operation and guide it smoothly towards the vehicle.
14. Carefully guide the scooter fully into the car - Ensure there is clearance for the boom to swing fully in
to position
15. Press and hold the down button until the scooter/chair is firmly placed on to the vehicle floor.
16. If you ordered a restraint system, this should now be employed.
17. Return the handset back into its docked position – ensure the cable is clear of trapping hazards.
WARNING! Do not continue to hold the down button after the scooter/chair is grounded
18. Press the power button (the indicator red light should no longer be illuminated indicating power OFF)
To Next Page
Loading...