What to do if the battery meter dips on my Pride Mobility REVO Scooter?
H
hurleymatthewJul 26, 2025
If the battery condition meter dips significantly and the motor surges or hesitates when you press the throttle control lever on your Pride Mobility Scooter, fully charge the batteries. If the issue persists, have your authorized Pride Provider load test each battery. Refer to the previous troubleshooting question for instructions on performing a load test yourself.
K
Kevin JuarezAug 1, 2025
What to do if my Pride Mobility REVO experiences a controller trip?
U
uarnoldAug 1, 2025
If you experience a possible controller trip with your Pride Mobility Scooter, which may occur if you attempt to install the battery pack while the key is inserted or if the motor controller is in overheat protective mode, shut down your scooter for at least several minutes to allow the controller to cool. Alternatively, try reinserting the key into the key switch.
J
Joseph HernandezAug 7, 2025
How to fix a solenoid brake trip on Pride Mobility REVO Scooter?
J
Jacob McintoshAug 7, 2025
If your Pride Mobility Scooter experiences a solenoid brake trip, and the manual freewheel lever may be in the freewheel position, remove the key, then push the manual freewheel lever to the drive position, and restart your scooter.
F
fbentonAug 12, 2025
What to do if my Pride Mobility Scooter has a throttle trip?
D
Darryl WillisAug 12, 2025
If your Pride Mobility Scooter experiences a throttle trip because the throttle control lever may have been depressed while inserting the key, release the throttle control lever completely, then reinsert the key.
J
Jeffrey HaysAug 19, 2025
How to fix low battery voltage on Pride Mobility REVO Scooter?
J
John HallAug 19, 2025
To resolve the issue of low battery voltage on your Pride Mobility Scooter, charge the battery fully until the charger and any meters indicate completion. If the problem persists, contact your authorized Pride Provider for assistance.