Need help?Do you have a question about the Pride Hurricane and is the answer not in the manual?
Emphasizes reading and following all instructions for safe operation.
User agrees not to alter or remove safety features of the PMV.
Instructions on checking delivery completeness and reporting damage.
How to contact Pride for questions, comments, and address changes.
Explains symbols for warnings, mandatory, and prohibited actions.
Read manual, unsupervised children, max seating weight, pinch points, corrosive chemicals, EMI-RFI.
Unlocked/freewheel mode, locked/drive mode, positioning for mode changes.
AGM/Gel-Cell batteries, plug orientation, power seat safety, anti-tip wheels, cell phone/radio use, water exposure.
Grounding prong, extension cords, battery terminal safety.
Battery capacity mixing, explosive conditions, tire safety, disposal/recycling, lead content, safety goggles.
Read manual, authorized setup, practice with attendant, maneuvering tips.
Warnings against unauthorized modifications and lifting by removable parts.
Recommends a safety check before each use for smooth and safe operation.
Checks for tire inflation, electrical connections, harness, brakes, and battery charge.
Proper tire pressure, weight capacity, and consequences of exceeding it.
Safe operation on inclines, cornering, and avoiding sudden stops.
Driving on inclines, avoiding freewheel mode, zigzagging, and hazardous surfaces.
Chart showing maximum safe incline angles based on user weight.
Warnings about oxygen tank and rear basket weight limits.
Leaning forward for stability, rollback note, driving position.
Risks of high cornering speeds, reducing speed and steering angle.
Explanation of regenerative and disc park brake systems.
Suitable and unsuitable surfaces for PMV operation.
Warning against operating on public streets and observing traffic rules.
Warnings about curbs, steps, and drop-offs, correct approach.
Warnings about rain, snow, ice, and extreme temperatures.
How to engage/disengage freewheel mode and safety warnings.
Avoid stairs/escalators, proper door operation.
Safe elevator entry/exit, maneuvering in tight spaces.
Warnings about using lifts with occupied mobility devices.
Lead content, heavy batteries, freezing, proper connection, protective caps.
Procedures for damaged batteries and recommended recycling.
Turning off power when stationary for extended periods.
Securing PMV and batteries during transport.
Importance of secure fastening if required for safe operation.
Safety tips for mounting/dismounting, seat security, armrest use.
Warnings about bending and reaching, maintaining center of gravity.
Consult physician regarding medications and limitations affecting operation.
Warnings against operating under the influence and smoking precautions.
Risks of EMI/RFI, tested immunity level, and caution with electronic devices.
Identifies controls on the tiller console like speed dial, throttle, horn, etc.
How to read the battery meter on the tiller console.
How to activate and the automatic shut-off feature of turn signals.
Operation of the 4-way flashers.
How to activate the horn for safety.
Instructions for powering the PMV on/off and associated warnings.
How to control the PMV's front and rear lights.
How to preselect and limit the PMV's top speed using the dial.
Adjusting PMV speed between half and full settings.
Using the handbrake for additional stopping power.
How to control forward and reverse speed using the throttle lever.
How the status LED indicates electrical problems or flash codes.
Function of fuses protecting lighting, signals, and console systems.
Location of batteries, circuit breaker, freewheel lever, and anti-tip wheels.
Importance and warning against removing anti-tip wheels.
Role of batteries in powering the PMV.
Function of the electromechanical unit driving the wheels.
How to engage/disengage freewheel mode and safety warnings.
Function of the breaker and how to reset it.
Need for two 12-volt deep-cycle batteries, charging before first use.
How to interpret the battery condition meter.
Prohibitions on grounding, extension leads, children, and mandatory reading.
Explosive gases, ventilation, using supplied charger, inspection, and case opening.
Step-by-step guide to charging batteries using the off-board charger.
Meaning of LED lights on the charger.
PMV behavior when batteries are charging.
How the charger works and prevents overcharging.
Checks for proper cable connection and charger insertion.
Recommendation for using the supplied off-board charger.
Guidelines for charging based on daily or infrequent use.
Importance of keeping batteries fully charged and avoiding deep discharge.
Tips for increasing PMV range, route planning, speed.
AGM or Gel-Cell batteries recommended, avoiding wet-cell.
Step-by-step instructions for replacing PMV batteries.
Handling lead, using same type/capacity, not mixing, professional service.
Explanation of deep-cycle battery behavior and break-in period.
Recommended charging and usage cycles for new batteries.
Contacting providers for PMV requirements for public transport.
Checks for battery charge and freewheel lever position.
Step-by-step guide to safely mounting the PMV.
Checklist for comfortable and safe operation before starting.
Warnings about holding pets, passengers, tiller items, towing.
Proper posture, hand placement, and basic steering.
How to stop using throttle and handbrake, automatic brakes.
Step-by-step guide to safely dismounting the PMV.
How the automatic power down timer works and how to resume operation.
How to adjust the tiller angle for comfortable viewing and control.
How to rotate the seat for easier boarding and positioning.
Adjusting seat position forward or backward for legroom.
How to adjust the seatback angle and warnings for reclining.
Adjusting the angle of the armrests.
How to change the seat height to one of three positions.
Instructions for operating the power seat and safety rules.
How to disassemble the PMV into seven pieces without tools.
Detailed steps for disconnecting harnesses and removing components.
Warning about unplugging harnesses before separating sections.
How to release the toggle latch for frame separation.
Steps to separate the front and rear sections of the PMV.
Steps to reassemble the PMV after disassembly.
Aligning pegs and connecting frame sections during assembly.
Warning to avoid pinching the front-to-rear harness during assembly.
Explains flash codes from the status LED for troubleshooting.
Steps to check when the PMV appears unresponsive.
What to do if the PMV doesn't move when the throttle is engaged.
Steps for when the main circuit breaker trips frequently.
What to do if the battery meter drops and the motor surges.
Importance of maintaining correct tire pressure for pneumatic tires.
Cleaning and conditioning plastic and metal parts, warnings.
How to clean and disinfect the PMV safely.
Ensuring battery terminals are tight, uncorroded, and properly oriented.
Keeping these areas dry and clean.
Steps for replacing pneumatic or solid tires and wheels.
Warnings about professional service, tire deflation, and key removal.
Steps for assembling the drive wheel, including axle key installation.
Checking connections, insulation, and seeking professional repair.
Cleaning and waxing plastic shrouds for gloss retention.
Reusing nylon lock nuts and where to get replacements.
How to replace a blown fuse with the correct rating.
How to replace PMV light bulbs, specifying 24-volt.
Guidelines for storing the PMV for extended periods.
Protecting batteries from freezing and extreme temperatures.
Regulations and procedures for disposing of the PMV and its components.
Coverage for structural frame components.
Prorated warranty for drivetrain components like transaxle and brake.
Coverage for bearings, rubber components, electronics, etc.
Warranty coverage for batteries provided by the manufacturer.
Warranty period for reconditioned units.
Items not covered by warranty, including wear and tear, abuse, and unauthorized repairs.
Procedure for obtaining warranty service from an authorized provider.
Limitations on implied warranties like merchantability and fitness for purpose.
Details on model number, length, width, weight, and turning radius.
Information on speed, range, ground clearance, and weight capacity.
Details on seating type, dimensions, seat weight, and drive system.
Type of tires, battery requirements, and battery weight.
Battery charger type and conformity to testing standards.
Visual representation of PMV dimensions and turning radius.
To Next Page
General
