Jet 2/Rev F/Feb03 www.pridemobility.com 39
X. CARE AND MAINTENANCE
CAUTION! If inspection determines excessive wear on the brushes, they must be replaced or
motor damage will result. Failure to maintain the brushes could void the warranty.
To inspect or replace the motor brushes:
1. Remove the seat and body shroud. See VII. Disassembly.
2. Unscrew the motor brush caps. See figure 27.
3. Remove the brushes.
4. Inspect for wear. See figure 28.
5. Replace brushes, if necessary. Contact your authorized Pride provider for replacement brushes.
To Next Page
Loading...
