5
PRODUCT SAFETY SYMBOLS
The symbols below represent labels used on the product to identify warnings, mandatory actions, and
prohibited actions. It is very important for you to read and understand these symbols completely. Do not
remove these labels from your product. Please note that not all of the symbols may be used on your chair
model.
Pinch/Crush Points Hazard! Do not place objects or appendages in the path of
moving parts.
Electrical Hazard
This product has been tested and complies to IEC 60601-1-2.
Read and follow the information in the owner’s manual.
Maximum weight capacity
Do not connect an extension cord to the AC/DC converter or the battery charger. A
UL Listed or UL Recognized single outlet plug-style surge protector with a minimum
of 1000 joules of protection may be used. The surge protector MUST be plugged
directly into an electrical outlet.
Removal of grounding prong can create electrical hazard. If necessary, properly
install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug
access.
Do not connect the heat and massage hand control directly to the motor. Connect
the hand control directly to the junction box to prevent equipment damage.
Do not place objects under chair. Make sure area is clear of obstructions, including
pets and small children, during operation.
Do not place objects under the footrest when chair is in fully reclined position.
Make sure area is clear of obstructions, including pets and small children, during
operation.
Do not cover or place the external transformer under the chair. Keep in an open,
well-ventilated area free from foreign material and away from possible pinch points.
Class II Equipment
Indoor Use Only. Avoid exposure to rain, snow, ice, salt, or standing water. Maintain
and store in a clean and dry environment
II. SAFETY
To Next Page
Loading...
