27
Sundancer
VII. OPERATION
BEFORE GETTING ONTO YOUR SCOOTER
n Have you fully charged the batteries? See VI. Batteries and Charging.
n Is the manual freewheel lever in the drive (up) position? Never leave the manual freewheel lever pushed down
unless you are manually pushing your scooter.
GETTING ONTO YOUR SCOOTER
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your scooter.
3. Pull up on the seat lock lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Pull up on the seat lock lever and rotate the seat until you are facing forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
n Is the seat at the proper height? See VIII. Comfort Adjustments.
n Is the tiller handle at a comfortable setting and locked securely in place? See VIII. Comfort Adjustments.
n Is the key inserted in the key switch and in the on position?
n Does the scooters horn work properly?
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR SCOOTER
After planning your route:
n Set the speed adjustment dial to your desired speed.
n Press your thumb against the appropriate throttle control lever.
n The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the
speed you preselected with the speed adjustment dial.
n Pull on the left handgrip to steer your scooter to the left. Pull on the right handgrip to steer your scooter to the right.
n Move the tiller to the center position to drive straight ahead.
n Release the throttle control lever to decelerate and come to a complete stop.
n The electromechanical disc park brake automatically engages when your scooter comes to a stop.
GETTING OFF OF YOUR SCOOTER
1. Bring your scooter to a complete stop.
2. Make certain that the key is removed from the key switch.
3. Pull up on the seat lock lever and rotate the seat until you are facing toward the side of your scooter.
4. Make certain that the seat is locked securely in position.
5. Carefully and safely get out of the seat and stand to the side of your scooter.
6. You can leave the seat facing to the side to facilitate boarding your scooter the next time you wish to operate it.
WARNING! Never attempt to get onto or off of your scooter without first removing the key from the
key switch. This prevents the scooter from moving if accidental throttle control lever contact is made.
To Next Page
Loading...
