Pride Sundancer - Comfort Adjustments

28
Sundancer
VIII. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that allows
adjustment to several positions from the scooter deck to the
furthest forward stop
1. Lift the tiller adjustment lever. See figure 9.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller in position.
Lowering The Tiller To The Scooter Deck
NOTE: In order to lower the tiller to the scooter deck, you
must first remove the seat and batteries. See IX. Disassembly
and Assembly.
1. Turn the scooter tiller to the right so the tiller, when lowered,
will be to the left of the seat post. See figure 9A.
CAUTION! Do not attempt to forcefully lower the
tiller if it is not in the proper lowering position.
Excessive force can possibly damage the tiller
adjusting mechanism.
2. Pull up on the tiller adjustment lever and lower the tiller slowly
toward the scooter deck. See figure 9B.
NOTE: When the tiller is past the last locking stop, you can
release the tiller adjustment lever. The tiller will not stop
again until it reaches its lowest point.
When the tiller reaches its lowest point you will hear a positive
click. The tiller is now locked.
Raising The Tiller From The Scooter Deck
In order to raise the tiller from the scooter deck you must lift up
on the tiller adjustment lever to unlock the tiller. Continue to hold
the tiller adjustment lever up until the tiller reaches the position
you desire. Be sure the tiller locks into place.
FIGURE 9A. LOWERING THE TILLER
TILLER ADJUSTMENT
LEVER
FIGURE 9. TILLER ADJUSTMENT
FIGURE 9B. LOWEST TILLER
POSITION
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the scooter is in motion.