PrimaLuceLab SpA ESATTO user manual
English
WARNING
If improperly handled, ESATTO may be damaged. Please follow the instructions below:
•
Do not disassemble the unit
•
Do not drop, subject to excessive impact open, or subject to electric shock any part of ESATTO.
•
Do not short the electronic elements
•
Do not expose to temperatures below -20°C and above +60°C
•
Do not burn or incinerate any component.
•
Do not expose to rain or other atmospheric effect related to water
•
Do not bend, modify or force any part of ESATTO
Index
Component Identification 2
Package contents 2
Technical specifications 3
Controlling ESATTO with EAGLE or computer with Windows OS 4
Controlling ESATTO with Virtual HandPad 14
Controlling ESATTO with ASCOM drivers and third party softwares 19
Updating ESATTO firmware 23
Application example: ESATTO with Schmidt-Cassegrain and EdgeHD telescopes 25
Application example: ESATTO with refractor telescopes 29
Application example: ESATTO with Ritchey-Chretien telescopes 33
INFORMATION TO USERS 37
QUALITY CONTROL
After being manufactured in our laboratories, each ESATTO unit is tested by PrimaLuceLab technical experts to verify all me-
chanical and electronic components, then perform a calibration of the focuser so that is ready to use. If you find any malfunc-
tion, please contact us immediately (+ 39-0434-1696106 or support@primalucelab.com). Do not try to disassemble, repair or
modify the ESATTO yourself, without our written approval, in order maintain the manufacturer’s warranty.
To Next Page
Loading...