PrimaLuceLab ESATTO 2 - Technical specifications

PrimaLuceLab SpA ESATTO user manual
Technical specifications
ESATTO 2”
ESATTO 3”
ESATTO 4”
Power
12V or through USB - 5.5/2.5 connector - positive tip polarity
Power consumption @ 12V
max 350mA
Working temperature
-20°C / +60°C
Payload capacity
5 kg
8 kg
10 kg
Control with:
USB
WiFi
Resolution
0,04 microns per step
Travel
15mm
25mm
35mm
Thread on draw tube
M56x1 male
M81x1 male
M110x1 male
Body thickness
67mm
77mm (including flange)
91mm (including flange)
Temperature probe
Internal to read motor temperature (in the package)
External for focus temperature compensation (optional)
Calibration sensor
For automatic detection of max in and max out positions
Provided software
Driver for Windows 64 bits (compatible with Windows Vista, 7, 8 and 10)
FOCUSER Manager for control with Windows 10 operative system
ASCOM driver for control from external software (tested with ASCOM platform 6.4)
Virtual HandPad for WiFi control
Weight
835 gr.
1345 gr.
2050 gr.
"
page 3
NOTE
In order to proceed with installation you have to download the ESATTO drivers and softwares package from our
website:
www.primalucelab.com/astronomy/downloads
Save the package (it’s in zip format) onto the EAGLE or computer you want to use to control the ESATTO and
unzip it with the proper unzip software (You can right-click and select “Expand” or you can use software from
https://www.winzip.com).