Primare I20 - Front Panel Display; Switching the Amplifier On and Off

>
Using the I20 Integrated Amplifier
4
FRONT PANEL DISPLAY
The following illustration shows the information on the front panel display:
57
V
]B
]A
]A Volume setting.
]B Currently selected input.
To dim the front panel display
• Press the DIM button on the remote control.
The display will dim to show just the currently selected source.
To restore the normal display
• Press the DIM button again.
SWITCHING ON AND OFF
To switch on
• Use the switch under the left-hand edge of the front panel.
During normal operation you can leave the I20 switched on and in standby.
To switch to standby
•Press the STANDBY button on the front panel or the STBY button on the
remote control.
To switch on from standby
•Press the STANDBY button on the front panel.
Selecting any function with the remote control will also switch on the I20 from
standby.
§2 Using 19/6/02, 10:16 am4