Need help?Do you have a question about the Primare R35 and is the answer not in the manual?
General| Type | Phono Preamplifier |
|---|---|
| Total Harmonic Distortion | <0.01% |
| Output | 1 x RCA |
| Gain MM | 40 dB |
| Gain MC | 60 dB |
| MM Capacitive Loading | 100 pF |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | 1 x RCA |
| RIAA Accuracy | +/- 0.5 dB |
| Input Impedance | 47 kOhm |
Essential advice on fire risk, electric shock prevention, fuse replacement, and proper handling.
Guidance on reading instructions, avoiding water, object entry, ensuring ventilation, heat, climate, and rack placement.
Instructions for cleaning, power sources, power cord protection, grounding, power lines, and non-use periods.
Procedures for abnormal smells, damage requiring service, and when to refer to qualified service personnel.
Introduction to the R35 Phono Preamplifier, its features, and setup for system matching with phono cartridges.
Information on obtaining additional support through authorized dealers or the Primare website.
Lists the supplied components and advises retaining packaging for future transport needs.
Guidance on connecting moving-magnet or moving-coil cartridges, including MM/MC selector and gain settings.
Instructions for connecting the R35 to a preamplifier or processor using RCA or XLR outputs.
Steps for connecting the mains power cable and switching on the R35, including standby mode information.
Details the RCA and XLR analogue input and output connectors on the back panel.
Explains the location of impedance and capacitance setting switches, accessible after removing covers.
Describes the function of the subsonic filter switch and the MM/MC selector for cartridge type.
Details the gain selector switch for adjusting output level and the service input for updates.
Specifies the type, impedance, and maximum output level for RCA and XLR outputs and RCA inputs.
Details gain levels, impedance loading, capacitive loading, channel separation, THD+noise, and signal-to-noise ratio.
Provides information on power consumption, size, weight, and available colours (black or titanium).
Guidance on verifying AC supply phase using the Polarity Pen and expected burn-in period for optimal sound.
Explains how to use the remote trigger input/output for powering the R35 on/off with other Primare devices.
Detailed instructions and tables for adjusting input impedance and capacitance using DIP switches.
To Next Page
