Need help?Do you have a question about the Primare R32 and is the answer not in the manual?
Steps for connecting the phono cartridge and setting selectors.
Procedure for connecting the R32 outputs to a preamplifier.
Guide for connecting the mains power cable and turning on the unit.
Instructions for adjusting gain for low-output moving-magnet cartridges.
Important warnings and instructions for safe operation and installation.
Instructions to prevent electrical shock and hazards.
Precautions for ventilation, heat, cleaning, and power sources.
General| Type | Phono Preamplifier |
|---|---|
| Frequency Response | 20Hz – 20kHz -0.5dB |
| Signal-to-Noise Ratio | 80dB |
| Weight | 8.5 kg |
| Gain MM | 40 dB |
| Gain MC | 60 dB |
| Input Impedance MM | 47 kΩ |
| Input Capacitance MM | 100 pF |
| Input Impedance MC | 100 Ω |
| Total Harmonic Distortion (THD) | < 0.005% |
| Input Impedance | 47 kΩ |
| Outputs | 1 x RCA |
| RIAA Accuracy | +/- 0.2 dB |
| Dimensions (WxDxH) | 430 x 380 x 95 mm |
| Inputs | 1 pair RCA (MM/MC) |
To Next Page
