Need help?Do you have a question about the Primare I30 and is the answer not in the manual?
General| Signal-to-Noise Ratio | > 100dB |
|---|---|
| Input Sensitivity | 250mV |
| Total Harmonic Distortion | < 0.07% |
| Inputs | 5x RCA, 1x XLR |
| Outputs | 1x RCA (pre-out) |
| Damping Factor | > 100 |
| Dimensions | 430 x 100 x 385 mm (W x H x D) |
| Frequency Response | 20Hz - 20kHz (±0.1dB) |
Details copyright information, company address, and product disclaimers.
Instructions and warnings for connecting the amplifier to the mains power supply.
General safety instructions, installation guidelines, FCC, and EEC compliance details.
Introduces the 130, its high-performance amplifier, flexible inputs, and balanced design.
Covers fixed/variable outputs, tape outputs, and intuitive front panel controls.
Explains using the 130 with other Primare products and remote control system.
Provides detailed specifications for power, impedance, inputs, outputs, and dimensions.
Identifies and explains the function of each front panel control button.
Instructions for switching the amplifier on, off, and putting it into standby mode.
Guide to selecting one of the six available audio inputs.
Instructions on how to change audio volume and sound balance.
Details on changing audio phase and making recordings with the amplifier.
Identifies and labels all connectors on the rear panel of the amplifier.
Details on connecting loudspeakers and preamplifier outputs.
Instructions for connecting various audio sources to the amplifier inputs.
To Next Page
