Prime TNODP23 User Manual

STEP 1 - Set the time
• Plug in the timer and let it
charge for 30 minutes.
• Use the up ( ) and
down ( ) arrow to set the
current time.
MODEL #TNODP23
IN CASE OF POWER FAILURE
Timer will continue to operate on battery backup if the
power goes out; however it will not turn attached devices
on or off. Once power is restored, programming will
resume. If power remains out longer than the battery
backup will operate, re-program the timer as explained in
Steps 1, 2 and 3 of the “Programming Instructions”.
NOTE: Battery is permanently installed and not
replaceable. It automatically recharges when power is
provided to the timer.
STEP 2 - Pick a preset option
• Press one or more of the
preset options that meet your
needs.
• When the button lights up
the timer is set (timer must
be plugged in for buttons to
illuminate).
• If you would like a custom
on/off time, move to Step 3.
If not, the setup of your new
EZ-SET timer is FINISHED!
STEP 3 - Set a Custom
On/Off Time
• Hold down “Custom ON”
and press the up ( ) and
down ( ) arrow to set the
ON time.
• Hold down “Custom OFF”
and press the up ( ) and
down ( ) arrow to set the
OFF time.
• Ensure the timer is still
plugged in. Press,
BUT DO NOT HOLD DOWN, the “Custom On” and
“Custom Off” buttons. Buttons will turn blue
when the program is activated.
EZ-SET OUTDOOR
DIGITAL TIMER
PROGRAMMING INSTRUCTIONS
Congratulations! You have purchased the easiest to
use timer on the market today. In three steps or less,
your timer will be ready to use.
1. Set the time.
2. Choose a preset option.
3. Set a custom on/off time.
CUSTOM COUNTDOWN:
• Press “CTD”.
• Press up ( ) and down ( ) arrow to set the
countdown from 1 minute to 24 hours.
(Note: “CTD” will flash on LCD to indicate the
countdown feature is active)
MANUAL ON/OFF OVERRIDE:
• Press “On/Off” to bypass the current setting and turn
your device On or Off.
(Note: Timer settings will resume based on the next
programmed cycle)
ADDITIONAL FEATURES
On to step 3
CTD
Custom
ON
5am-8am
5pm-12am 5pm-8am
Custom
OFF
On
Off
CTD
Custom
ON
5am-8am
5pm-12am 5pm-8am
Custom
OFF
On
Off
CTD
Custom
ON
5am-8am
5pm-12am 5pm-8am
Custom
OFF
On
Off
CTD
Custom
ON
5am-8am
5pm-12am 5pm-8am
Custom
OFF
CTD
Custom
ON
5am-8am
5pm-12am 5pm-8am
Custom
OFF
On
Off
STOP
PLUG IN THE TIMER AND MOVE TO STEP 2

Prime TNODP23 Specifications

General

Brand	Prime
Model	TNODP23
Category	Timer
Language	English

Summary

Programming Instructions

Set the Time

Plug in the timer, charge for 30 minutes, and use arrows to set the current time.

Pick a Preset Option

Press preset buttons to meet needs. Buttons illuminate when set. Move to Step 3 for custom settings.

Set Custom On/Off Time

Hold 'Custom ON'/'Custom OFF' and use arrows to set ON/OFF times. Press buttons to activate program.

Additional Features

Custom Countdown

Press 'CTD', then use arrows to set countdown from 1 minute to 24 hours. 'CTD' will flash on LCD.

Manual On/Off Override

Press 'On/Off' to bypass current setting and turn device On or Off. Settings resume on next cycle.

Power Failure Operation

Safety Information and Specifications

Safety Warnings

Includes warnings for electric shock (unplug before cleaning, do not use in wet locations) and fire risks.

Electrical Specifications

Device is grounded, for 125 VAC/60 Hz, and has limits for resistive, tungsten, and motor loads.

Regulatory Statements

FCC Compliance

Device complies with Part 15, subject to conditions preventing harmful interference and accepting received interference.

Industry Canada Compliance

Device complies with Industry Canada licence-exempt RSS standards, subject to conditions preventing interference.