EasyManuals Logo

Primera Disc Publisher SE Quick Start Guide

Primera Disc Publisher SE
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Automated Optical Disc
Duplication & Printing System
Publishing a Disc
Congratulations, you are now ready to start printing and burning discs!
For instructions on printing or publishing a disc see Section 3 of the User’s Manual.
For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html.
8
6
Installing the Ink Cartridge
With the cover open, press the button on the
top of the Publisher to move the Ink
Cartridge Carrier to the load position.
Open the cartridge cover by pressing down
on the tab.
Remove the ink cartridge from its
packaging.
Slowly remove the tape cov-
ering the cartridge's print
head.
DO NOT TOUCH THE
COPPER AREA!
Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
Close the Publisher’s front cover.
7
Aligning the Cartridge
If you are using a PC the Installer will prompt you to align the cartridge.
If you are using a Mac you will be prompted to align the cartridge before you print for the first time.
Note: An alignment print is required every time you install a new cartridge. The software will always prompt you to
align the cartridges. Make sure there is an unprinted disc in the bin for this alignment.
For Macintosh and PC
Quick Start
© 2015 All rights reserved.
P/N 510964 - 102909

Other manuals for Primera Disc Publisher SE

Questions and Answers:

Primera Disc Publisher SE Specifications

General IconGeneral
ModelDisc Publisher SE
TypeDisc Duplicator
Max Disc Capacity20 discs
Print Resolution4800 dpi
InterfaceUSB 2.0
Number of Drives1
Weight24 lbs
Write SpeedUp to 16x (DVD), Up to 48x (CD)
Print TechnologyInkjet
Supported Operating SystemsWindows
Supported Disc FormatsCD-R, DVD-R, DVD+R
Supported Disc TypesCD-R, DVD-R, DVD+R

Related product manuals