Princess 12000 - Installation and Connectivity; General Installation Requirements; Exhaust Hose Setup; Window Kit Installation

Instruction manual
Pair your device to the Princess Home app
• Make sure your device is powered.
• Open the Princess Home app.
• Select your country code, enter the cell phone number and tap
“Get” to get a message containing the verification code.
• Enter the verification code in the message and tap “Log in” to log
in to the App.
• Click "Add Device" to add a new device.
• Select the device you wanted to connect.
• Follow the instructions on the app to connect the device.
• To control your device with voice using a smart speaker please
refer to the manufacturer's instructions on how to enable a skill
through your device.
INSTALLATION
• The air-conditioner should be installed on a flat and stable
surface. Do not block the air outlet and allow at least 30cm
around the unit.
• Socket wiring should be in accordance with the local electric
safety requirements.
Exhaust Hose Installation
• Twist both ends of the hot-air exhaust hose(9) into the hose
connector window end(8) and the hose connector air conditioner
end(10).
• Insert the hose connector air conditioned end(10) into the
openings at the back of the air conditioner.
• Fix the hose connector window end(8) to the nearest windowsill.
Universal Window Kit Installation
EN