Princess 12000 - Initial Setup and Operation; Before First Use

Instruction manual
5 Temperature up
6 Temperature down
7 LED display
8 Auto swing
9 Fan speed
10 Sleep mode
1 Receiving signal
2 Cooling
3 Dehumidifying
4 Fan
5 Auto swing
6 Timing
7 Timer on/off
8 Sleep mode
9 Fan speed
10 Temperature display
• 2xAAA size batteries are required.
• Ensure batteries are inserted in the correct direction.
• When replacing, ensure both batteries are changed
simultaneously.
• Press the corresponding buttons as explained in the control panel
part to operate the fan.
BEFORE THE FIRST USE
Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose and adjust the window position well.
• Insert the power cord into a grounded AC220~240V/50Hz socket.
• Press the power button to turn on the air-conditioner.
• Check whether the exhaust hose has been mounted properly.
• Set the temperature range: 16°C-31°C.
• When using functions on cooling and dehumidifying, allow at
least 3 minutes between powering off and powering on.
EN