Printronix SL5000 - Page 2

2 of 2 179632-001B
5. Press ← or → until the desired tag type displays. If the desired tag type
does not display, use the substitution tables below to select the
compatible tag type.
6. Press
↵ to select the tag type. An asterisk (*) displays next to the selected
tag type.
7. If you want this selection to remain permanent, save the configuration and
set the configuration to be the Power-Up Config. (in the QUICK SETUP or
CONFIG. CONTROL menu). Refer to the
Quick Setup Guide or the
User’s Manual .
Table 1. MP RFID
Newly Supported Tag Type
Compatible
Tag Type
Alien Gen2 Squiggle EPC Gen 2 96
Avery AD-210 (aka Strip) Alien Squig 96
Avery AD-220 (aka Runway) EPC Gen 2 96
Omron Loop Alien Squig 96
TI Dallas EPC Gen 2 96
Table 2. MP2 RFID
Newly Supported Tag Type
Compatible
Tag Type
Avery AD-210 (aka Strip) Alien Squig 96