Need help?Do you have a question about the Printronix PrintNet P8000 Line and is the answer not in the manual?
General| Print Technology | Line Matrix |
|---|---|
| Print Resolution | 180 x 144 DPI |
| Print Width | Up to 13.6 inches |
| Connectivity | Ethernet, USB, Serial, Parallel |
| Noise Level | 54 dBA |
Details the PrintNet's logical printer architecture and processing phases.
Lists methods: control panel, HTML forms, Telnet, and PTX_SETUP.
Explains network configuration via web browser using the PrintNet's IP address.
Describes using Telnet commands to remotely configure PrintNet settings.
Details configuration menu items for Printer, Network, Print Path, Print Model, Log Path, etc.
Allows setup of print format, host communication, and emulation settings.
Allows managing or displaying printer configurations, including load, save, delete, reset, and report.
Manages printer file system: delete, upload, download, overwrite files, view list, and optimize/reboot.
Specifies settings for network protocols, enabling/disabling them; TCP/IP is always enabled.
Describes the path a print job takes through destination/queue, model, and logpath.
Allows specifying settings for up to eight different TN5250/3270 sessions.
Configures SNMP trap managers, email alerts, filtering alerts by group.
Specifies printer name, location, contact, serial number, and TCP/IP services.
Explains setting root and guest user passwords for PrintNet settings.
Describes upgrading printer firmware, noting configuration loss except network settings.
Mandatory TCP/IP settings (IP, subnet mask) for detection, and optional settings.
Details Unix setup: configuring PrintNet TCP/IP settings and adding a printer to the Unix host.
Mandatory and optional settings for Unix PrintNet configuration.
Configures z/OS to print IPDS files on line matrix network printer, requiring IPDS option.
Each TCP/IP printer must be defined to PSF with a PRINTDEV statement in the startup procedure.
Creating line descriptions for each PrintNet printer on AS/400, required for V3R2 and V3R7.
Adding TCP/IP interface to AS/400 using ADDTCPIFC command.
Setting up remote printing via LPR parameters manually or using Remote Writer.
Verifies ASCII printing capability and network connectivity by pinging and sending spooled files.
Configures AS/400 as an IPDS printer, requiring IPDS option and specifying AFP/SCS transformation.
Checklist for AS/400 IPDS configuration, including printer setup, TCP/IP, and interface verification.
Describes creating a printer device description using CRTDEVPRT command.
Configures AFP with CRTPSFCFG, used by PSF/400 for IPDS files.
Specifies TCP/IP parameters for PSF in device description, overriding APPC info.
Commands to configure IPDS on iSeries V4R3: CRTDEVPRT, CRTPSFCFG.
Creating a printer device description using CRTDEVPRT command for V4R2 and above.
Tests IPDS printing by varying line, starting TCP/IP, verifying interface, and pinging printer.
Configures line matrix printer on z/OS and Info Print Server for TN3270E printing.
Steps to set up TN5250 print queues on AS/400, requiring V3R7+ and functional TCPIP.
Sets up TN5250 connection/device via telnet session using specific commands.
Change settings stored in flash memory, affecting current settings after power cycle.
Alter current settings in memory; lost on power cycle unless saved.
Lists current or working settings; use 'stored' or 'default' for flash memory settings.
Provides TCP access lists to restrict host connections and manage users/passwords.
To Next Page
