What does 'ERROR: DC PROGRAM NOT VALID' mean on my Printronix Printer?
If your Printronix Printer displays 'ERROR: DC PROGRAM NOT VALID', download the program again. If the message appears, replace the flash memory SIMM.
What should I do if my Printronix Printer says 'CLEAR PAPER JAM'?
If your Printronix Printer shows 'CLEAR PAPER JAM', you should clear the paper jam and reload the paper. If the message reappears, it is recommended to contact your authorized service representative.
What to do if my Printronix Printer is 'PRINTER HOT'?
If your Printronix Printer displays 'PRINTER HOT', inspect the printer's environment. If the area is hot or dusty, relocate the printer. If this issue occurs frequently, it's best to contact your authorized service representative.
What does '06 HOST REQUEST' mean on Printronix Printer?
The '06 HOST REQUEST' error on your Printronix Printer indicates that either the host computer or the printer controller requires attention.
How to fix 'PAPER JAM TIMEOUT' on Printronix Printer?
To fix a paper jam timeout on your Printronix Printer, clear the paper jam and then reload the paper.
How to resolve 'BUFFER OVERRUN' error on Printronix Printer?
To fix a 'BUFFER OVERRUN' error on your Printronix Printer, make sure the printer's serial interface configuration settings match those of the host computer. Check the Data Protocol, Baud Rate, Data Bits, Stop Bits, Parity, Data Terminal Ready, and Request to Send settings.
What does 'RIBBON NOT RECOGNIZED' mean on my Printronix Printer?
If your Printronix Printer displays 'RIBBON NOT RECOGNIZED', use the ribbons specified for the printer.
What does 'UNKNOWN RBN1' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays 'UNKNOWN RBN1', install a new ribbon.
What to do if Printronix Printer displays 'POWER SUPPLY HOT'?
To address the 'POWER SUPPLY HOT' message on your Printronix Printer, check the printer's environment. If it's hot or dusty, try relocating the printer. If this issue occurs frequently, contact your authorized service representative.
What does 'PLATEN OPEN TIMEOUT' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays a 'PLATEN OPEN TIMEOUT' message, close the platen lever.
Lists MTBF for various printer models under specific print conditions.
Specifies the average time required for installation and repair tasks.
Outlines the requirements for routine preventative maintenance.
Lists specific spare parts for the P7X05 model.
Lists specific spare parts for the P7X10 model.
Lists specific spare parts for the P7X15 model.
Lists specific spare parts for the P7X20 model.
Lists specific spare parts for the P70XX ZTP model.
General| Print Technology | Line Matrix |
|---|---|
| Resolution | 180 x 144 dpi |
| Print Width | 13.6 inches |
| Weight | 145 lbs |
| Connectivity | Parallel, Serial, Ethernet, USB |
| Paper Handling | Continuous form |
| Noise Level | 55 dBA |
To Next Page