To Next Page
J
Jamie CampbellAug 13, 2025
What to do if my Printronix P7010 says 'PAPER JAM TIMEOUT'?
- Ttimothy09Aug 13, 2025
If your Printronix Printer displays a 'PAPER JAM TIMEOUT' message, clear the paper jam and then reload the paper.
What to do if my Printronix P7010 says 'PAPER JAM TIMEOUT'?
If your Printronix Printer displays a 'PAPER JAM TIMEOUT' message, clear the paper jam and then reload the paper.
What to do if my Printronix Printer says 'PAPER OUT TIMEOUT'?
If your Printronix Printer displays a 'PAPER OUT TIMEOUT' message, load paper and run a print test. If the message reappears, contact your authorized service representative.
How to fix 'RIBBON STALL TIMEOUT' on a Printronix P7010 Printer?
To resolve a 'RIBBON STALL TIMEOUT' error on your Printronix Printer, try reloading the ribbon.
What to do if my Printronix P7010 Printer displays 'PLATEN OPEN TIMEOUT'?
If your Printronix Printer shows a 'PLATEN OPEN TIMEOUT' message, load paper, close the forms thickness lever, and then press the CLEAR button.
How to troubleshoot 'SHUTTLE STALL' on my Printronix Printer?
To troubleshoot a 'SHUTTLE STALL' on your Printronix Printer, set the platen lever to match the thickness of the paper, but not too tightly. Check and adjust the platen gap. Inspect the ribbon mask for deformation that snags and interferes with shuttle movement. If fault source is not apparent, contact your authorized service representative.
How do I fix 'SHUTTLE JAM' on my Printronix Printer?
To fix a 'SHUTTLE JAM' on your Printronix Printer, check for any obstruction to the shuttle, a twisted ribbon, or a platen lever closed too tightly. If the source of the fault is not apparent, contact your authorized service representative.
What does 'B12 ERROR: PROGRAM MISSING' mean on my Printronix P7010 Printer?
If your Printronix Printer displays the error 'B12 ERROR: PROGRAM MISSING', it indicates that there is no program in the printer memory. Download an emulation.
What does '06 HOST REQUEST' mean on my Printronix Printer?
If your Printronix Printer displays the message '06 HOST REQUEST', it means that the host computer or printer controller requires attention.
General| Brand | Printronix |
|---|---|
| Model | P7010 |
| Category | Printer |
| Language | English |
Details on power needs, site requirements like clearance, environment, and power circuit.
Steps for powering on the printer and explanation of its online, offline, and fault modes.
Description of control panel layout, keys, and their functions for printer operation.
Step-by-step instructions for routine tasks like reloading paper and canceling print jobs.
Covers modifying parameters, saving configurations, and navigating the menu system.
Covers bar code verification, hex dumps, and troubleshooting common fault messages.
