197
Absorb After ^PY
• Absorb Motion (default). The first paper motion following a ^PY
command is ignored.
• Absorb All. The system ignores all the data and terminator until a host
generated motion terminator is detected.
• Disable. System terminators following a graphics command are sent to
the printer and result in paper motion.
UPC Descenders
• Enable (default). UPC/EAN barcodes are printed with descenders, even
if there is no human readable data.
• Disable. UPC/EAN barcodes are printed without descenders if there is no
human readable data.
Rot. Char Size
• Adjusted (default). Rotated (clockwise/counterclockwise), expanded
characters have a different size than an unrotated character with the
same size parameters.
• Not Adjusted. Rotated, expanded characters are the same size as
unrotated characters with the same size parameters.
Ignore Spaces
• Disable (default). Trailing spaces are not deleted from the last
alphanumeric element in a graphics pass.
• Enable. Trailing spaces are deleted from the last alphanumeric element
in a graphics pass.
Midline PY (includes ^PN)
• Disable (default). The Graphics mode Enable command, ^PY, must be
the first three characters of a line.
• Enable. The ^PY or ^PN can occur anywhere in a line.
Print Quality
• Data Processing (default). ALPHA text and barcodes are printed in
normal mode at 60 x 72 dpi. This mode should be set if the highest speed
is desired.
• High. ALPHA text and barcodes are printed in dark mode at
120 x 72 dpi.
Expanded Font
• Scalable (default). These expanded characters have rounded edges.
• Block. These are block characters compatible with IGP-X10 printers.
To Next Page
Loading...
