46
Chapter 3 Integrated Print Management System
Cancel A Print Job
The procedure to cancel a print job depends on the printer emulation and your
application software. Contact your system administrator for additional
information.
1. If the printer is online, press ON LINE/CLEAR to place the printer in offline
mode.
2. From the host system, stop the print job.
NOTE: If the print job is not stopped from the host system before pressing
CANCEL, the print job continues with data missing when the printer
returns to online mode. Exercise caution to prevent unwanted data
loss occurrences, as this function deletes unprinted data in the
printer. This function is active only in offline mode; the purpose of this
function is to eliminate the necessity of printing unwanted data when
print jobs are canceled.
3. Press CANCEL.
NOTE: You may need to enable the Cancel option on the front panel.
See “ADVANCED USER” on page 221. for details.
4. Set the top-of-form. Refer to the Quick Setup Guide.
To Next Page
Loading...
