86
Chapter 4 HOST INTERFACE
E-Net Adapter Submenu
The E-Net Adapter interface allows you to locate the printer on a LAN rather
than attach the host directly into the printer. The detailed configuration of this
option is given in the
PrintNet User's Manual
.
Buffer Size in K
This option configures the amount of memory allocated for the Ethernet
buffer. You can specify between 1-16 Kbytes. The default is 16 Kbytes.
Ethernet Submenu
The Ethernet interface allows you to locate the printer on a LAN rather than
attach the host directly into the printer. The detailed configuration of this
option is given in the
Network Interface Card User's Manual
.
Buffer Size in K
This option configures the amount of memory allocated for the Ethernet
buffer. You can specify between 1 and 16 Kbytes, in 1-Kbyte increments.
The default is 16 Kbytes.
E-Net Adapter
(from page 72)
Buffer Size
in K
16*
1-16
* = Factory Default
Ethernet
(from page 72)
Buffer Size
in K
16*
1-16
* = Factory Default
To Next Page
Loading...
