WLAN PARAMS
97
Ant. Diversity
The type of antenna used:
• Diverse (default). Select when you want to use the antenna with the best
reception.
• Primary. Select when you want to use the Primary antenna on the server.
• Auxiliary. Select when you want to use the Auxiliary antenna on the
server.
Preamble
The length of the preamble in transmit packets.
• Default (default). The Wireless option automatically determines the
length.
• Short. For newer printers which can handle higher transer rate speeds.
• Long. For older printers which cannot handle higher transfer rate speeds.
Antenna
• Primary (default). Select when you want to use the Primary antenna on
the RF card.
• Auxiliary. Select when you want to use the Auxiliary antenna on the RF
card.
Power Mgmt
This allows you to set power-save mode and sleep time. A value specifying
the sleep time in milliseconds will be provided. If set to zero, power-save
mode will be disabled. The range includes:
• 0 ms. (default)
• 100 ms. - 1000 ms.
Transmit Power
The power level as a percentage of full power (0 - 100%).
Internat. Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe. The options include:
• Disable (default)
• Enable
To Next Page
Loading...
