Printronix P7010 - Lineprinter Plus Emulation

137
LinePrinter Plus Emulation
NOTE: When the printer is set to SPC Twx Params or SPC Coax Params, no
LP+ menu items will take effect on the same offline. The LP+
Emulation resets when the printer is taken offline.
EMULATION
(from page 103)
Printer
Protocol
CPI/LPI
Select
Host
Command
Font
Attributes
Page
Format
Print Char.
Set
Reset Cmd
CFG Ld
(see page 138)
Select CPI
10.0 CPI*
12.0 CPI
13.3 CPI
15.0 CPI
17.1 CPI
20.0 CPI
Select LPI
6.0 LPI*
8.0 LPI
10.3 LPI
P/S Mode CPI
Changed*
Unchanged
Enable*
Ignore All
Ignore CPI
Ignore LPI
Ignore Unidir.
(see page 138) (see page 138)
Disable*
Power up config
Current config
Factory config
* = Factory Default
LinePrinter+
Set
Substitution
Inactive*
Active
Barcode
x-offset
Disable*
Enable