Printronix P7010 - Electrical Characteristics; Interfaces

289
Electrical Characteristics
The above values are calculated while printing 136 column, all upper case
high speed “E’s”. The stand-by (Energy Saver mode) wattage is 28W (96
BTU/Hr) for all models.
Interfaces
Voltage (+/-10%) Freq (+/-10%) Amps Watts BTU/Hr
P7005 AC 100-120V 50-60 Hz 3A 275W 940
AC 200-240V 50-60 Hz 1.5A 275W 940
P7010 AC 100-120V 50-60 Hz 3.5V 300W 1025
AC 200-240V 50-60 Hz 1.6A 300W 1025
P7015 AC 100-120V 50-60 Hz 4.5A 430W 1469
AC 200-240V 50-60 Hz 1.9A 430W 1469
P7205 AC 100-120V 50-60 Hz 3.5A 350W 1195
AC 200-240V 50-60 Hz 1.6A 350W 1195
P7210 AC 100-120V 50-60 Hz 3.5A 350W 1195
AC 200-240V 50-60 Hz 1.6A 350S 1195
P7215 AC 100-120V 50-60 Hz 5A 460W 1571
AC 200-240V 50-60 Hz 2A 460W 1571
P7220 AC 100-120V 50-60 Hz 5.5A 540W 1844
AC 200-240V 50-60 Hz 2.1A 540W 1844
Type: Standard: IEEE 1284 Parallel, Centronics Parallel,
RS-232 serial, Dataproducts Parallel
Optional: Coax, Twinax, RS-422 serial,
Ethernet 10/100Base-T.
Logic Levels:
TTL/EIA
®
-232E/EIA-422B
Transfer Rates: Up to 200 Kilobytes on parallel interface.
Up to 19.2K baud on RS-232 serial interface.
Up to 115.2K baud on RS-422 serial interface