B
bdelacruzSep 10, 2025
What does '15 COMM CHECK' mean on my Printronix Printer?
- DDan WeaverSep 10, 2025
If your Printronix Printer displays '15 COMM CHECK', check the cable connection.
What does '15 COMM CHECK' mean on my Printronix Printer?
If your Printronix Printer displays '15 COMM CHECK', check the cable connection.
What should I do if my Printronix Printer says 'CLEAR PAPER JAM'?
If your Printronix Printer shows 'CLEAR PAPER JAM', you should clear the paper jam and reload the paper. If the message reappears, it is recommended to contact your authorized service representative.
What to do if my Printronix Printer is 'PRINTER HOT'?
If your Printronix Printer displays 'PRINTER HOT', inspect the printer's environment. If the area is hot or dusty, relocate the printer. If this issue occurs frequently, it's best to contact your authorized service representative.
What does 'PAPER OUT TIMEOUT' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays a 'PAPER OUT TIMEOUT' message, it means you need to load paper into the printer.
What to do if Printronix Printer shows 'STACKER FULL'?
If your Printronix Printer displays 'STACKER FULL', remove the paper from the stacker.
What does 'UNKNOWN RBN2' mean on my Printronix Printer and how to resolve it?
If your Printronix Printer displays 'UNKNOWN RBN2', install a new ribbon.
What does 'RIBBON NOT RECOGNIZED' mean on my Printronix Printer?
If your Printronix Printer displays 'RIBBON NOT RECOGNIZED', use the ribbons specified for the printer.
What does 'UNKNOWN RBN1' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays 'UNKNOWN RBN1', install a new ribbon.
How to fix 'SHUTTLE STALL' on Printronix Printer?
To address a 'SHUTTLE STALL' on your Printronix Printer, set the platen lever to match the thickness of the paper, but not too tightly. Check and adjust the platen gap. Inspect the ribbon mask for deformation that snags and interferes with shuttle movement. If the fault source is not apparent, contact your authorized service representative.
What does 'PLATEN OPEN TIMEOUT' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays a 'PLATEN OPEN TIMEOUT' message, close the platen lever.
Print Technology | Line Matrix |
---|---|
Resolution | 180 x 144 dpi |
Print Width | 13.6 inches |
Weight | 145 lbs |
Connectivity | Parallel, Serial, Ethernet, USB |
Paper Handling | Continuous form |
Noise Level | 55 dBA |