What does 'Framing Error' mean on Printronix P5005B Printer and how to fix it?
If your Printronix Printer displays 'FRAMING ERROR', check your serial host interface parameter settings and adjust them if necessary so that they match the settings of the attached host.
What to do if Printronix P5005B says 'Ribbon Ink Out Change Ribbon'?
If your Printronix Printer displays 'RIBBON INK OUT CHANGE RIBBON', replace the ribbon. Alternatively, you can press CLEAR for an additional two minutes of printing before the fault displays again.
How to resolve 'Load Paper' message on Printronix Printer?
If your Printronix Printer shows 'LOAD PAPER', load paper into the printer.
What to do if Printronix P5005B Printer shows 'Stacker Full'?
If your Printronix Printer displays 'STACKER FULL', remove the paper from the stacker.
How to fix 'Stacker Jam' error on Printronix P5005B?
If your Printronix Printer displays 'STACKER JAM', remove the paper.
What to do if Printronix P5005B Printer displays '15 Comm Check'?
If your Printronix Printer displays '15 COMM CHECK', check the cable connection.
How do I fix 'GRF CHK ERROR PRESS STOP' on Printronix Printer?
If your Printronix Printer displays 'GRF CHK ERROR PRESS STOP', press CLEAR and then ON LINE.
How to fix '08 Hold Print Timeout' on Printronix P5005B Printer?
If your Printronix Printer displays '08 HOLD PRINT TIMEOUT', press ON LINE to put the printer in the online state.
How to resolve 'Buffer Overflow' error on Printronix P5005B Printer?
If your Printronix Printer displays 'BUFFER OVERFLOW', check your serial host interface parameter settings and adjust them to match the settings of the attached host if necessary.
How to fix 'Close Platen' error on Printronix P5005B Printer?
If your Printronix Printer displays 'CLOSE PLATEN', close the forms thickness lever.
Describes the printer family, models, and technology.
Explains symbols and formatting used in the manual.
Defines printer communication protocols and emulation.
Specifies electrical power needs and safety precautions.
Step-by-step guide for unpacking the printer safely.
Instructions for connecting power and interface cables.
Step-by-step guide for loading paper into the printer.
Procedure for setting the printer's top-of-form position.
Overview of the printer's control panel layout and functions.
Covers routine tasks like paper and ribbon management.
Instructions for adding new paper without losing settings.
Detailed guide on how to change the printer ribbon.
Explains printer configuration and parameters.
Guide to using the printer's configuration menus.
Adjusting settings for better print appearance.
Top-level menu for printer configuration.
Menu for selecting the printer's emulation mode.
Menu for configuring printer connection interfaces.
Lists common parallel and serial connection types.
Explains the IEEE 1284 interface modes and capabilities.
Details the serial interface specifications.
Maintenance schedule and safety for cleaning.
General guide to identifying and fixing printer issues.
Explanations and solutions for printer error messages.
Details compatible ribbon types and part numbers.
Information on supported paper types, sizes, and thickness.
Operating and storage conditions for temperature and humidity.
Input voltage and RMS current specifications.
Method for demand printing without losing forms.
Table showing ASCII character mappings.
Compliance information regarding FCC regulations.
German conformity statement.
General| Print Width | 5.5 inches |
|---|---|
| Connectivity | Parallel, Serial, USB |
| Emulations | IBM, Epson |
| Paper Handling | Continuous form |
| Noise Level | 55 dB |
To Next Page