EasyManua.ls Logo

privileg EC1720BC-GS - User Manual

privileg EC1720BC-GS
64 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Dampfbügelstation
Gebrauchsanleitung
EC1720BC-GS
Anleitung/Version:
196617_DE_20190705
Bestell-Nr.: 28602114
Nachdruck, auch
aus zugs wei se, nicht
ge stat tet!
MAX
MIN

Questions and Answers

  • L
    Luis PotterAug 11, 2025
    What to do if my privileg Iron is not emitting steam?
    • M
      Melissa ClarkAug 11, 2025
      If your privileg Iron isn't emitting steam, it could be due to a couple of reasons. First, check if there's enough water in the water tank (11). If not, fill it up to the “MAX” mark. Secondly, the temperature might be set too low. Try setting a temperature within the black range using the temperature control dial (3).
  • V
    Victoria ObrienAug 17, 2025
    Why is my privileg Iron soleplate cold even when plugged in?
    • T
      tannerhopkinsAug 17, 2025
      If the soleplate of your privileg Iron remains cold despite being plugged in, there are a couple of things to check. First, ensure that the socket you're using has power by checking the fuse or trying another socket. Also, make sure the temperature isn't set to the lowest “MIN” level. If it is, adjust it to a higher temperature using the temperature control dial (3).
  • K
    Kimberly KeithAug 23, 2025
    What to do if the steam shot button is not working on my privileg Iron?
    • J
      Jordan BakerAug 23, 2025
      If the steam shot button on your privileg Iron isn't working, there are a few potential causes. Ensure the water tank (11) is filled up to the “MAX” mark. Also, the temperature might be set too low; adjust it to a temperature within the black range using the temperature control dial (3). If you're using the function for the first time, try pushing the steam shot button several times in a row until steam is emitted.
  • S
    Sydney GonzalezAug 29, 2025
    Why did my garment discolour after ironing with my privileg Iron?
    • B
      Bobby Jackson IIAug 29, 2025
      If your garment has discoloured after ironing with your privileg Iron, it's likely that the temperature setting was too high. Make sure the heat setting corresponds to the specifications on the care label. You can also test an inconspicuous area on the inside seam before ironing the entire garment.
  • L
    lewisjamesSep 4, 2025
    Why is limescale escaping from my privileg Iron?
    • E
      Erik BakerSep 4, 2025
      If limescale or impurities are escaping from the soleplate openings of your privileg Iron, it's likely because you've filled the water tank (11) with very hard water. Clean the appliance.

privileg EC1720BC-GS Specifications

General IconGeneral
Power2400 W
Auto Shut-offYes
Self-cleaningYes
Anti-drip SystemYes
Anti-calc SystemYes