Operation
Page EN-13
Operation
WARNING
Non-compliance with the
safety instructions may result
in serious injury and material
damages.
■ Only use the steam iron if
you have read page EN-6
and understood all infor-
mation.
NOTICE
Misuse may damage the ap-
pliance.
■ Always place the steam
iron on the steam genera-
tor iron. Ensure it is correct-
ly positioned.
Preparation
1. Remove all packaging, film,
etc. before first use.
2. Place the steam generator
iron (b) on a stable and level
surface.
3. Make sure that the soleplate (5)
is clean and dry.
4. Always place the steam iron (a)
firmly on the thermal rest (6) of
the steam generator iron (b).
Removing the iron
from the steam
generator
The iron is locked with a locking
bolt.
• Press the unlock button (7) to
remove the iron (a) from the
steam generator (b).
The locking bolt (14) is pressed
down and you can remove the
iron from the side.
Filling the water tank
WARNING
Risk of short circuit!
Any water that has seeped
into the appliance may cause
a short circuit or electrocu-
tion.
■ Pull the mains plug from
the socket before fi lling the
water tank.
■ Always keep the water tank
inlet closed during operation.
To Next Page
Loading...