To replace Glass Breaker, hold
switch open; manually fold
Glass Breaker into handle;
release switch
To use all other tools, unfold desired
tool from Flashlight handle. Tools
include: Flat Head
Screwdriver; Sharp
Knife; Phillips Head
Screwdriver; Bottle
and Can Opener;
Small Pry Bar;
Scissors; 6mm and
8mm Allen Wrenches
• Clean Flashlight with Multi-Tool with a
clean, dry cloth as needed; dry after use
• Remove and store batteries when not
in use for 90 days or longer
• Lubricate moving parts with standard
consumer lubricant as needed
• Use a standard consumer knife
sharpener to sharpen knives and
scissor blades as necessary
• Knives and other tools are very sharp; use
caution with these and all sharp-bladed objects
• Keep blades sharp, a dull knife can be more
dangerous to use. Use all tools for their intended
purpose only
• Follow City Ordinance Guidelines for proper
disposal of dry cell batteries
• Flashlight should be used for the intended
purpose of providing illumination only
• Recommended for Ages 14+.
Keep out of reach
of children
Maintenance
Warnings
Belt and Rope Cutter is
designed to quickly release
bound items. Slide belt or
rope into notch on side of
Flashlight; use enclosed
blade to cut belt or rope
Striker Head surrounds
Flashlight lens.
To use Glass Breaker,
slide switch toward top of
Flashlight; Glass Breaker will
deploy automatically.
Tools
1
2
3
4
1
2
3
4
If the Flashlight does not turn on, works intermittently; or has a weak light:
• Remove and replace batteries. Be
sure battery pack is properly inserted
• Be sure Flashlight head is screwed
on tightly, and batteries are inserted properly
in battery pack
Troubleshooting
• If problem persists, contact Pro-4
Tactical for technical advice
• See www.Pro-4Tactical.com for
Warranty and Replacement Information
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are known
to the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
To Next Page
Loading...
