14 | English
Instructions
When the water tank is full the warning FL will
show on the display and the appliance will
pause operation to prevent the water tank from
overowing.
To empty the water tank:
Step 1: Turn o the appliance and unplug it
from the wall socket.
Step 2: Unplug and dismantle the air exhaust
hose. Place a shallow tray underneath the
water outlet.
Step 3: Unscrew the bottom drainage cap,
unplug the drainage plug and allow the water
to collect in the shallow tray. The water will
automatically start to ow.
Step 4: To fully empty the water tank gently tilt
the appliance back on its rear wheels. Do not
tilt more than 30 degrees.
Step 5: Once empty, return the appliance to a
fully upright position and replace the drainage
plug and bottom drainage cap.
Step 6: Empty the shallow tray.
To Next Page
