English | 7
INSTALLATION
Prior to and after installation adhere to the
below
1. When moving the appliance to the chosen
location, ensure it is kept in an upright
position.
2. Do not place or use the appliance, power
cord, or any accessories in a bathroom,
wet, or damp place.
3. Place the appliance on a at and dry
surface.
4. Keep it at least 50cm away from
surrounding walls and/or objects.
5. Leave the appliance in an upright position
for at least two hours before rst use.
Connecting the Exhaust Hose
In many ways, your new air conditioner is like
a refrigerator, but instead of securing the cold
air inside it blows the air around the room.
Air conditioners utilise refrigerant gas to cool
down warm air in a room and then blow the
now-cooled air around the space with internal
fans. They must vent the hot air outside (usually
via a window, ventilation shaft, or dedicated
passage) with an exhaust hose.
To connect you exhaust hose and other
accessories, follow the instruction below:
Exhaust Hose Assembly
In this stage, you will be assembling the
hose and will need…
• Circular connector
• Heat exhaust hose
• Heat exhaust hose short connector
1. Insert the circular connector into the heat
exhaust hose short connector.
2. Rotate the circular connector
counterclockwise to lock it into the end of
the heat exhaust hose.
To Next Page
Loading...