8
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronic Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
V 1.1
TROUBLESHOOTING
Trouble Cause Solution
Machine does
not work.
• Power off.
• Water-full indicator is on.
• Timer function is active.
• Power on.
• Drain internal water tank.
• Deactivate TIMER function.
Machine
auto-restarts
frequently.
• The unit is in direct sunlight.
• Doors and windows are open,
or other heat sources are in the
room.
• Filters are too dirty.
• Air-inlet/air-outlet is blocked.
• Reposition the air conditioner.
• Close the door and windows
and remove other heat sources.
• Clean or replace filters.
• Remove blockage.
Too noisy.
• Machine is not on a level
surface.
• Place it on a flat, solid floor t
avoid vibration.
Compressor
does not work.
• Compressor time-delay
protection is on.
• Wait for 3 minutes, then restart
the air conditioner.
Remote
control does
not work.
• Distance too great.
• Remote control signal not
detected by control panel.
• The batteries are drained.
• Make sure that the remote
control is correctly aimed at the
control panel.
• Replace the batteries.
SPECIFICATIONS
Main voltage 220-240V~50Hz Global warming potential 1975 kgCO2 eq.
Rated input power 1340W Efficiency ratio (EER 2.62
Power in standby 1.0W Efficiency clas A
Cooling capacity
3.53kW
(12,000BTU/h)
Fan speeds 2
Dehumidifying
capacity
50L/24hr Thermostat 16-31°C
Air ow 380m³/hr
Max. extension length of
exhaust hose
1.5m
Sound power level 65dB (A)
Recommended floor
area
16-22m²
Charge R410A/520g
Dimensions (WxHxD)
Weight
325x830x370mm
27kg
To Previous Page
Loading...
