Pro-Form PFEL04915.0 - Step 3: Base Foot and Bracket Removal; Step 4: Rear Stabilizer Attachment

7
3. Remove the indicated screw (A) and the ship-
ping bracket (B) from the Base (1). Discard the
screw and the shipping bracket.
Next, tighten the Base Foot (26) into the
Base (1).
B
26
A
3
1
4
83
7
C
2
68
4. Orient the Rear Stabilizer (7) as indicated by the
sticker. Attach the Rear Stabilizer to the Frame
(2) with two M10 x 127mm Screws (83).
Next, hold the handle (C) on the Frame (2),
press the Latch (68), and lower the Frame until
the Rear Stabilizer (7) rests on the floor.