Need help?Do you have a question about the Pro-Ject Audio Systems Debut Carbon EVO and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Platter Material | Steel |
| Effective Arm Length | 218.5 mm |
| Overhang | 18 mm |
| Cartridge | Ortofon 2M Red |
| Signal-to-Noise Ratio | >70 dB |
| Speed | 33, 45 RPM |
| Platter | 12" |
| Tracking Force | 1.8 g |
| Power Supply | 15V DC |
| Included Accessories | Dust Cover |
| Motor | DC Motor |
| Tonearm | 9-inch carbon fiber tonearm |
Details the various components and features of the Pro-Ject Debut Carbon EVO turntable.
Important safety precautions for using the Pro-Ject Debut Carbon EVO turntable.
Step-by-step instructions for setting up the Pro-Ject Debut Carbon EVO turntable.
Procedure for correctly adjusting the downforce for the turntable cartridge.
Guidance on setting the anti-skating force based on cartridge downforce.
How to connect the record player to an audio amplifier.
Instructions for connecting the turntable to the mains power supply.
Steps for attaching and adjusting the turntable lid.
How to operate the turntable and change playback speeds.
Advice for optimizing the record player's performance and placement.
Guide on how to adjust the cartridge azimuth for correct tracking.
Instructions for installing and wiring a new cartridge.
Recommendations for routine maintenance and cleaning of the turntable.
Detailed technical data for the turntable and included cartridges.
Common issues and potential causes of incorrect operation or faults.
Guidance on seeking professional service and support for the turntable.
Information regarding the manufacturer's warranty for the product.
To Next Page
