Pro-Ject Audio Systems T1 Series - User Manual

1
Unpack all items from accessory bag.
3
Remove dust cover carton from the box.
4
Remove the protection covering.
6
7
Unpack the power supply.
8
Unpack the platter.
9
Put the drive belt on the pulley
& sub-platter.
10 11
T1 Setup Guide
Please read before unpacking.
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and setup in a clean enviroment.
• Important for warranty: Do not throw packaging away.
• Setup is demonstrated with T1 Phono SB.
2
Lift the wrapped turntable
out of the box.
5
Put the platter on the turntable.
a) Connect it E (RCA cable)
Detachable cable only included with T1 Phono SB & T1 BT
b) Drive belt
c) Stylus pressure gauge
d) Adapter for 7“ singles
a)
b)
c)
d)
T1
>
>
T1 Phono SB
T1 BT
Connect to any amp with integrated phono amplier or use an
external phono preamp.
Pre-mounted Connect it E (RCA cable) included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject MaiA S2 (stereo integrated amplier).
Select Line Out to connect to an amplier without a phono
stage. Select Phono Out if you have an amplier with a phono
stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Select Line Out to connect to an amplier without a phono
stage. Select Phono Out if you have an amplier with a phono
stage. Enjoy the warmth of vinyl with the comfort of wireless
technology.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Speaker cable Speaker cable
Connect it E (RCA Cable)
Speaker cable Speaker cable
Connect it E (RCA Cable)
Put the felt mat on the platter. Remove tonearm twist tie.
Connect to your hi-system
and enjoy your music!
Speaker cable Speaker cable
Connect it E (RCA Cable)
Speed Change:
Small pulley 33 RPM
Large pulley 45 RPM
T1 Phono SB: Speed Selector 33/45
Beware of breaking the needle!

Summary

Turntable Setup and Assembly

Getting Started: Essential Preparation

General advice for unpacking, setup space, and retaining packaging for warranty purposes.

Step-by-Step Assembly Guide

Instructions covering unpacking, belt installation, platter placement, and tonearm setup.

Connecting Your Turntable

T1 Standard Model Connection

Connect the T1 to amplifiers with integrated phono or external phono preamplifiers.

T1 Phono SB Connection Options

Select Line Out or Phono Out for amplifiers without or with a phono stage respectively.

T1 BT Wireless Audio Connection

Connect the T1 BT for wired audio output or enjoy wireless playback with Bluetooth.

Pro-Ject Audio Systems T1 Series Specifications

General

Output	RCA
Weight	5.5 kg
Signal to noise	65dB
Type	Belt drive
Speed	33, 45 RPM
Drive	Belt
Tonearm	8.6" balanced aluminum tonearm
Cartridge	Ortofon OM 5E
Effective tonearm length	218.5 mm
Outboard power supply	Yes
Tonearm Type	Aluminum