Need help?Do you have a question about the Pro-Ject Audio Systems Pro-Ject Debut SE II and is the answer not in the manual?
General| Drive Principle | Belt Drive |
|---|---|
| Tonearm | 8.6" aluminium tonearm |
| Effective Arm Length | 218.5 mm |
| Overhang | 18 mm |
| Cartridge | Ortofon OM 5E |
| Weight | 5.5 kg |
| Type | Belt-drive |
| Speed | 33/45 RPM |
| Platter | 300mm steel |
| Wow & Flutter | < 0.1% |
Install the platter and felt mat onto the turntable hub spindle.
Remove transport screws and tonearm lock for operation.
Install the drive belt around the hub and motor pulley.
Adjust the tonearm counterweight for correct cartridge tracking force.
Set the anti-skating weight based on cartridge mass for proper groove tracing.
Connect the turntable's phono output to the amplifier's phono input.
Connect the power supply to the turntable and mains outlet.
Attach and adjust the turntable lid for proper opening and closing.
Manually adjust the drive belt for 33.33 or 45 r.p.m. playback.
Mount a cartridge to the headshell and connect tonearm wires.
Ensure the cartridge needle is vertical in the record groove.
Dust the player with a slightly moistened antistatic cloth. Avoid dry cloths.
Position the turntable on a low-resonance surface to avoid vibration.
Details nominal speeds, speed variance, wow/flutter, signal-to-noise, and dimensions.
Lists common symptoms like platter not turning or no signal.
Contact dealer for unresolved issues; proper packaging for returns.
To Next Page