Need help?Do you have a question about the Pro-Ject Audio Systems 2 Xperience and is the answer not in the manual?
General| Drive System | Belt drive |
|---|---|
| Platter | Acrylic platter |
| Tonearm | Pro-Ject 9cc |
| Power supply | Outboard power supply |
| Motor | 16V AC synchronous motor |
| Cartridge | Ortofon 2M |
| Outputs | RCA |
| Speed | 33, 45 (electronic speed change) |
Identifies and explains the turntable's controls, features, and connection points for user reference.
Step-by-step instructions for assembling and setting up the turntable, including fitting the platter and drive belt.
Guidance on fitting and connecting the cartridge to the headshell and tonearm for optimal playback.
Detailed procedures for adjusting cartridge downforce, VTA, tonearm azimuth, and anti-skating force.
Instructions for changing replay speeds and connecting the turntable to an amplifier.
Covers mains power connection, switching, fitting the lid, and routine maintenance procedures.
Lists common issues, potential causes, and guidance on service or seeking further advice.
Key technical data and specifications for the Pro-Ject 2 Xperience turntable.
Details about related Pro-Ject accessories, including phono pre-amplifiers and speed controllers.
To Next Page